SEPARATOR FOR ROLLER CONVEYOR SYSTEMs ASUR-400

Very lean edition, perfectly suitable for roller conveyor systems. Protected against dust and liquids. Stopping and separating of one or more accumulated pallet holders at a defined pallet holder stop plate in conveyor systems or at the working piece directly. Can also be used for positioning of for example pneumatic cylinders.

Type

Very slim design.
Query option with inductive sensors as standard.
Due to the very slim design with a width of only 28 mm, this stop module fits between the rollers with a small roller pitch or can be used in confined spaces.
Very well suited to stop KLT containers on gravity roller conveyors.

PRODUCT WEIGHT

ASUR-400-EW-15: 3,9 kg
ASUR-400-DW-15: 3,8 kg

PROPULSIVE FORCE

In order to ensure a perfect lowering movement of the stop module, the following propulsive forces must not be exceeded:
ASUR-400-…-15 -> FRmax = 550 N

FUNCTION EW

EW (single-acting): The lowering of the stop module is done by pneumatic pressure.
In the unpressurized state, the stop module moves upwards into the blocking position by a spring and the next workpiece carriers can be stopped.

FUNCTION DW

DW (double-acting): The lowering and raising of the stop module is done by pneumatic pressure.
In unpressurized state the stop module keeps his last reached position. The stop module has no spring. This increases the lowering force.

INSTALLATION

The stop Module is fastened using screws M8 from above or with M10 screws in the four threaded holes on the underside.

PNEUMATIC CONNECTION

G1/8 on the front

TEMPERATURE RANGE

Standard version: -20°C to +80°C

FURTHER TECHNICAL INFORMATION

See „Data sheet / operating manual'
in the 'Downloads' area

Datasheet / Operating manual – PDF
Step-file –> Downloadable below at the variants

Overview of the accessories for ASUR-400 – PDF

14010008
Push-in L-fitting
G1/8, for tubing O.D. 6 mm

14010020
Push-in fitting
G1/8, for tubing O.D. 6 mm

14010005
Supply air one way flow valve
G1/8, for tubing O.D. 6 mm

15000007
Inductive sensor M12x1
L = 65 mm, Sn = 4 mm

15010001
Plug connector, angled,
M12x1, cable length 5 m

15020002
Clamp holder M16x1
long version

Operating rangev = (m/min)69121518243036
ASUR-400Mass WT (kg)0 - 4000 - 3000 - 2500 - 2200 - 2000 - 1100 - 650 - 50

The values, given in the table above for the permissible total weight of the accumulated workpiece carriers (WT) and the permissible conveying speed, apply with a belt friction of µ=0,07 between workpiece carrier and conveyor band and with the use of an ASUTEC standard stop. To select the suitable stopper, we recommend the use of our online product finder.
The specified weight range is composed of the minimum workpiece carrier weight mmin and the maximum workpiece carrier weight mmax.
Maximum propulsive force:
FRmax = 550 N for the stoppers ASUR-400-…-15(-…)
This maximum propulsive force may not be exceeded in order to ensure that the stopper has sufficient force for lowering.
The specified values of the maximum propulsive force are based on a coefficient of friction μ = 0.2 between the stop and the workpiece carrier.

Too many different variations - Find the suitable stopper!

ASUR-400-EW-15

*Preferred variant*
Separator without damping for workpiece carrier loads up to 400 kg
Single acting function, 15 mm lowering stroke, with standard stop plate
Possibility to query the upper and lower position with the aid of inductive sensors
Step-file

    Title

    Your Name

    Your Company

    Your E-mail address

    Your Phone number

    I agree to receive news and product information from Asutec by newsletter.

    ASUR-400-EW-15-001

    Separator without damping for workpiece carrier loads up to 400 kg
    Single acting function, 15 mm lowering stroke, without stop plate
    Threaded holes in the front side for a custom-made stop plate
    Possibility to query the upper and lower position with the aid of inductive sensors
    Step-file

      Title

      Your Name

      Your Company

      Your E-mail address

      Your Phone number

      I agree to receive news and product information from Asutec by newsletter.

      ASUR-400-DW-15

      Separator without damping for workpiece carrier loads up to 400 kg
      Double acting function, 15 mm lowering stroke, with standard stop plate
      Possibility to query the upper and lower position with the aid of inductive sensors
      Step-file

        Title

        Your Name

        Your Company

        Your E-mail address

        Your Phone number

        I agree to receive news and product information from Asutec by newsletter.

        ASUR-400-DW-15-001

        Separator without damping for workpiece carrier loads up to 400 kg
        Double acting function, 15 mm lowering stroke, without stop plate
        Threaded holes in the front side for a custom-made stop plate
        Possibility to query the upper and lower position with the aid of inductive sensors
        Step-file

          Title

          Your Name

          Your Company

          Your E-mail address

          Your Phone number

          I agree to receive news and product information from Asutec by newsletter.

          ADDITIONAL VARIANTS ON REQUEST: +49 (0)7022-2791-0

          Comments are closed.