Angle damper ASME-15

Angle dampers ASME-15 damp the impact of accumulated pallet holders when changing over from a transverse to a longitudinal section and vice versa.

Type

Pneumatical damper. Housing hard-anodized aluminium. Stop plate hardened steel. Allowed pallet holder load up to 15 kg (see table).

WEIGHT DATA

All weight data relates to the total weight of the pallet holder
(pallet with material), not the axial force.

MAX. RAM PRESSURE

Dependent on friction between workpiece holder and conveyor system,
workpiece holder and stop plate, pneumatical pressure and ambient conditions.

TEMPERATURE RANGE

Device -10 C° up to + 80 C°

DAMPING

The damping force is self­adjusting in a certain area but can also be adjusted on the top of the separator.

+ = increase damping force
= reduce damping force

SCOPE OF SUPPLY

The items will be delivered without accessories. Accessories can be freely selected according to the ambient conditions. All accessory parts supplied are mounted depending on customer request.

MAINTENANCE

No maintenance is required. The area around the stop plate must be clean and exempt from swarf to guarantee an exactly positioning of the pallet holder.

Assembly instruction (on request)
Step-file –> Downloadable below at the variants

14010009
Air connection, straight shape, M5, for tubing outside diameter 6mm

Operating rangev = (m/min)69121518243036
ASME-15Mass WT (kg)0,25 - 150,25 - 100,25 - 90,25 - 80,25 - 70,25 - 60,25 - 40,25 - 3

This information applies to friction of µ=0,07 between pallet holder and conveyor band for a standard ASUTEC stop plate. To select the suitable separator, we recommend the use of our online product finder.

Too many different variations - call us, we can help!

ASME-15

Angle damper, for pallet holder loads up to 15 kg
Usually, for installation on the Bosch Rexroth positioning unit HP 1
Step-file

Title

Your Name

Your Company

Your E-mail address

Your Phone number

ASME-15-100

Angle damper, for pallet holder loads up to 15 kg
Usually, for installation on the Bosch Rexroth positioning unit HP 1
Delivery including air connection 14010009
Corresponds to Bosch Rexroth damper DA 1 / B

ASME-15-W

Angle damper, for pallet holder loads up to 15 kg
Usually, for installation with Bosch Rexroth TS 1 Transfer system
Step-file

Title

Your Name

Your Company

Your E-mail address

Your Phone number


ASME-15-W-100

Angle damper, for pallet holder loads up to 15 kg
Usually, for installation with Bosch Rexroth TS 1 Transfer system
Delivery including air connection 14010009
Corresponds to Bosch Rexroth damper DA 1 / A

ADDITIONAL VARIANTS ON REQUEST: +49 (0)7024-80594-0

Comments are closed.

×