Accessoriers
No items found
ASMS-20-EW-08-100
Stop module with 10 mm damping stroke for workpiece carrier load from 0.7 kg up to 20 kg
Single acting function, 8 mm lowering stroke
Delivery including air connections 14010004 and fastening set 75000036.
Single acting function, 8 mm lowering stroke
Delivery including air connections 14010004 and fastening set 75000036.
ASMS-20-EW-08-I
Stop module with 10 mm damping stroke for workpiece carrier load from 0.7 kg up to 20 kg
Single acting function, 8 mm lowering stroke
“-I” query option: Possibility to query the upper and lowered position with inductive sensors
Single acting function, 8 mm lowering stroke
“-I” query option: Possibility to query the upper and lowered position with inductive sensors
ASMS-20-EW-08-I-100
Stop module with 10 mm damping stroke for workpiece carrier load from 0.7 kg up to 20 kg
Single acting function, 8 mm lowering stroke
“-I” query option: Possibility to query the upper and lowered position with inductive sensors
Delivery including air connections 14010004 and fastening set 75000036
Single acting function, 8 mm lowering stroke
“-I” query option: Possibility to query the upper and lowered position with inductive sensors
Delivery including air connections 14010004 and fastening set 75000036
ASMS-20-EW-08-KU
Stop module with 10 mm damping stroke for workpiece carrier load from 0.7 kg up to 20 kg
Single acting function, 8 mm lowering stroke
With plastic stop plate
Single acting function, 8 mm lowering stroke
With plastic stop plate
ASMV-160
Asutec Slide Stops are designed to stop the workpiece pallets transverse movement and position it over the lift transfer unit for lowering on to the main conveyor section. The Slide Stops provide a high level of directional control to optimize your material traffic flow pattern.
ASMV-160-DW-17-I
Slide stop with damping for workpiece carrier loads from 15 kg up to 160kg.
Double acting function, 17 mm lowering stroke.
Without pneumatic pressure in upper position by spring force.
Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
4 air connections for independent movement of the stop plate and for lowering and raising up.
“I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
Double acting function, 17 mm lowering stroke.
Without pneumatic pressure in upper position by spring force.
Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
4 air connections for independent movement of the stop plate and for lowering and raising up.
“I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
ASMV-160-DW-17-I-001
Customized version: For light workpiece carriers and narrow installation situation.
Slide stop with damping for light workpiece carrier from 5 kg up to 25kg.
Double acting function, 17 mm lowering stroke.
Without hydraulic damping unit, but with air damping through exhaust air throttle.
Without pneumatic pressure in upper position by spring force.
Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
4 air connections for independent movement of the stop plate and for lowering and raising up.
“I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
Delivery including 3 air connectors 14010004, exhaust air throttle 14010048 and fastening set.
All air connections on the backside – thus the device is mountable between a small return unit (b=240 mm).
Without adapter plate – Fits only to the 50 mm wide TS 2-H section profile.
Slide stop with damping for light workpiece carrier from 5 kg up to 25kg.
Double acting function, 17 mm lowering stroke.
Without hydraulic damping unit, but with air damping through exhaust air throttle.
Without pneumatic pressure in upper position by spring force.
Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
4 air connections for independent movement of the stop plate and for lowering and raising up.
“I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
Delivery including 3 air connectors 14010004, exhaust air throttle 14010048 and fastening set.
All air connections on the backside – thus the device is mountable between a small return unit (b=240 mm).
Without adapter plate – Fits only to the 50 mm wide TS 2-H section profile.
ASMV-160-DW-17-I-100
Slide stop with damping for workpiece carrier loads from 15 kg up to 160kg.
Double acting function, 17 mm lowering stroke.
Without pneumatic pressure in upper position by spring force.
Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
4 air connections for independent movement of the stop plate and for lowering and raising up.
“I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
Delivery including air connectors 14010004 and fastening set 75000046.
Identical to the Bosch Rexroth slide stop VA 2/D-130.
Double acting function, 17 mm lowering stroke.
Without pneumatic pressure in upper position by spring force.
Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
4 air connections for independent movement of the stop plate and for lowering and raising up.
“I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
Delivery including air connectors 14010004 and fastening set 75000046.
Identical to the Bosch Rexroth slide stop VA 2/D-130.
ASMV-160-DW-17-I-103
Customized version: For light workpiece carriers and narrow installation situation.
Slide stop with damping for light workpiece carrier from 5 kg up to 25kg.
Double acting function, 17 mm lowering stroke.
Without hydraulic damping unit, but with air damping through exhaust air throttle.
Without pneumatic pressure in upper position by spring force.
Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
4 air connections for independent movement of the stop plate and for lowering and raising up.
“I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
Delivery including 3 air connectors 14010004, exhaust air throttle 14010048 and fastening set.
Slide stop with damping for light workpiece carrier from 5 kg up to 25kg.
Double acting function, 17 mm lowering stroke.
Without hydraulic damping unit, but with air damping through exhaust air throttle.
Without pneumatic pressure in upper position by spring force.
Angular lowering movement – as a result, it can be mounted on the Rexroth profile ST 2/…-H.
4 air connections for independent movement of the stop plate and for lowering and raising up.
“I” Sensing option: Possibility to query the upper and lower position and the retracted position of the stop plate with the aid of inductive sensors.
Delivery including 3 air connectors 14010004, exhaust air throttle 14010048 and fastening set.
ASP-1050
The positioning unit ASP-1050 is made for positioning and, if necessary, lifting out workpiece carriers at a processing station. Different location bolts can be used.
The designation of the positioning units indicates the lifting force in N at 6 bar pneumatic pressure and the stroke in mm.
The respective standard stroke (31 mm) can easily be reduced with internal stroke limitation rings.
With the installed stoke limitation, the lowered position usually remains unchanged - the extended state of the positioning unit is influenced by the stroke limitation.
The designation of the positioning units indicates the lifting force in N at 6 bar pneumatic pressure and the stroke in mm.
The respective standard stroke (31 mm) can easily be reduced with internal stroke limitation rings.
With the installed stoke limitation, the lowered position usually remains unchanged - the extended state of the positioning unit is influenced by the stroke limitation.
ASP-1050-31
Positioning unit
1050 N piston force and 31 mm stroke
Option to query the upper and lowered position with T-slot magnetic field sensors
1050 N piston force and 31 mm stroke
Option to query the upper and lowered position with T-slot magnetic field sensors
ASP-1050-31-I
Positioning unit
1050 N piston force and 31 mm stroke
Option to query the upper and lowered position with inductive sensors
1050 N piston force and 31 mm stroke
Option to query the upper and lowered position with inductive sensors